How to Add Second IP Address Windows 2022

 

1. Access Network Adapter Properties:

• Open the Control Panel.
• Navigate to Network and Internet > Network and Sharing Center.
• Click on “Change adapter settings” in the left-hand pane.
• Right-click on the network adapter you want to add the IP address to and select “Properties.”

2. Locate TCP/IP v4:

• In the Properties window, scroll down and locate “Internet Protocol Version 4 (TCP/IPv4)” in the list of items.
• Click on it and then click on the “Properties” button.

3. Access Advanced TCP/IP Settings:

• Click on the “Advanced” button in the TCP/IPv4 Properties window.

4. Add the Secondary IP Address:

• In the “IP Addresses” section, click on the “Add” button.
• Enter the following information for the new IP address:
  • IP address: The secondary IP address you want to assign.
  • Subnet mask: The subnet mask that corresponds to the secondary IP address.
• Click the “Add” button.

5. Confirm and Apply:

• Verify that both the primary and secondary IP addresses are listed in the IP Addresses section.
• Click “OK” on all open windows to save the changes.

6. Verify the Change:

• Open a command prompt and type ipconfig /all.
• Check the output to confirm that both IP addresses are now associated with the network adapter.

Important Notes: Administrative Privileges: You’ll need administrator privileges to make these changes. Subnet Mask: The subnet mask for the secondary IP address must match the subnet mask of the primary IP address. Network Configuration: Consult with your network administrator if you have any questions about your network configuration. Restart: In some cases, you may need to restart your computer for the changes to take effect.